Adder Technology DDC Ghost User Manual

Safety information  
Warranty  
• For use in dry, oil free indoor environments.  
Adder Technology Ltd warrants that this  
product shall be free from defects in  
• Not suitable for use in hazardous or  
explosive environments or next to highly  
flammable materials.  
workmanship and materials for a period of  
two years from the date of original purchase.  
If the product should fail to operate correctly  
in normal use during the warranty period,  
Adder will replace or repair it free of charge.  
No liability can be accepted for damage due  
to misuse or circumstances outside Adders  
control. Also Adder will not be responsible  
for any loss, damage or injury arising directly  
or indirectly from the use of this product.  
Adders total liability under the terms of this  
warranty shall in all circumstances be limited  
to the replacement value of this product. If  
any difficulty is experienced in the installation  
or use of this product that you are unable to  
resolve, please contact your supplier.  
DDC Ghost  
• Warning – the optional power adapter  
contains live parts.  
User Guide  
• No user serviceable parts are contained  
within the module or the power adapter  
- do not dismantle.  
Blue connector  
(to computer)  
Optional  
power  
input  
The DDC Ghost module is designed to  
attach in-line with a VGA connection  
in order to present Extended Display  
Identification Data (EDID) to the video  
controller independently of the actual  
monitor, switch or extender unit. Video  
signals are passed straight through the  
DDC Ghost.  
data  
G
A
• Do not use the power adapter if the  
power adapter case becomes damaged,  
cracked or broken or if you suspect that it  
is not operating properly.  
V
C O M P U T E R  
t
s
EDIDo  
h
G
C
D
signals  
E
N
D
O
L
C
ideo  
V
O R  
S
U
T
O N I T  
M
A
T
S
• Replace the power adapter with a  
manufacturer approved type only.  
The Extended Display Identification Data  
(EDID) information stored within the DDC  
Ghost can either be cloned from a monitor  
or used with a standard set of information  
(see Standard EDID Information).  
• If you use a power extension cable with  
the optional power adapter, make sure the  
total ampere rating of the devices plugged  
into the extension cable do not exceed  
either the cables ampere rating or that of  
the wall outlet.  
Black connector  
(to monitor)  
Control button  
and indicator  
European EMC directive  
89/336/EEC  
This equipment has been tested and found to  
comply with the limits for a class B computing  
What’s in the box  
device in accordance with the specifications  
in the European standard EN55022. These  
FCC statement  
This equipment generates, uses and can radiate  
limits are designed to provide reasonable protection against  
harmful interference. This equipment generates, uses and  
can radiate radio frequency energy and if not installed and  
used in accordance with the instructions may cause harmful  
interference to radio or television reception. However, there  
is no guarantee that harmful interference will not occur  
in a particular installation. If this equipment does cause  
interference to radio or television reception, which can  
be determined by turning the equipment on and off, the  
user is encouraged to correct the interference with one or  
more of the following measures: (a) Reorient or relocate  
the receiving antenna. (b) Increase the separation between  
the equipment and the receiver. (c) Connect the equipment  
to an outlet on a circuit different from that to which  
the receiver is connected. (d) Consult the supplier or an  
experienced radio/TV technician for help.  
radio frequency energy and if not installed and  
A
G
V
used properly, that is, in strict accordance with the  
manufacturers instructions, may cause interference to  
radio communications. It has been tested and found to  
comply with the limits for a Class A computing device in  
accordance with the specifications in Subpart J of part 15  
of FCC rules, which are designed to provide reasonable  
protection such interference when the equipment is  
operated in a commercial environment. Operation of this  
equipment in a residential area may cause interference, in  
which case the user at his own expense will be required  
to take whatever measures may be necessary to correct  
the interference. Changes or modifications not expressly  
approved by the manufacturer could void the users  
authority to operate the equipment.  
C O M P U T E R  
st  
o
h
G
C
D
D
E
N
O
L
C
O R  
S
U
T
A
T
M O N I T  
S
DDC Ghost module  
Adder Technology Limited,  
Technology House,  
Adder Corporation,  
Adder Asia Pacific  
Video cable  
29 Water Street,  
6 New Industrial Road,  
Hoe Huat Industrial Building  
#07-01, Singapore 536199  
(15 pin D-type male  
to 15 pin D-type  
male)  
Trafalgar Way, Bar Hill,  
Cambridge, CB3 8SQ,  
United Kingdom  
Newburyport, MA 01950,  
United States of America  
Tel: +44 (0)1954 780044  
Fax: +44 (0)1954 780081  
Tel: +1-888-932-3337  
Fax: +1-888-275-1117  
Tel: +65 6288 5767  
Fax: +65 6284 1150  
What you may additionally need  
Mains to 5VDC power adapter (if power cannot be obtained  
Email: support@adder.com  
from the controlling computer via the video cable)  
Adder P/N: PSU-IEC-5VDC  
Adder P/N: VSC18  
© 2008 Adder Technology Limited • Release 1.0e • January 2008 • Part No. ADD0074  
All trademarks are acknowledged. Documentation by Corporate Text & Design (www.ctxd.com)  
Additional video cable (15 pin D-type male to 15 pin D-type male)  

HP Hewlett Packard DK985A User Manual
Frigidaire FGB24T3ES User Manual
Foster Induction Hobs 7321 240 User Manual
EVGA nForce 122 YW E173 User Manual
Cypress FLEx18 CY7C0832AV User Manual
Compaq 202109 XX8 User Manual
Bosch Appliances NET 682 C User Manual
ATTO Technology Computer Hardware 5300 User Manual
ATI Technologies RADEON X1550 SERIES User Manual
Asus Evo Desktop Motherboard F1A75VEVO User Manual