21006
2.4 GHz Dual Handset CallWaiting
Caller ID CordlessTelephone
User’s Guide
We bring good things to life.
TABLE OF CONTENTS
FLASH/CALL WAITING ...................... 19
LAST NUMBER REDIAL ..................... 19
HOLD ............................................ 19
EXIT ............................................. 19
PAGE ............................................ 20
HANDSET TO HANDSET PAGING ......... 20
PAGING FROM THE BASE/
GROUP PAGE ................................. 20
MUTE ........................................... 20
TEMPORARYT ONE DIALING ............... 20
RECEIVER VOLUME CONTROL ............. 21
INTERCOM ......................................... 21
MAKING AN INTERCOM CALL ..... 21
RECEIVING AN INTERCOM CALL ... 22
ADVANCED INTERCOM FEATURES ........ 22
RECEIVING AN INCOMING
EQUIPMENT APPROVAL INFORMATION ........ 2
INTERFERENCE INFORMATION ................... 2
HEARING AID COMPATIBILITY (HAC)........ 2
INTRODUCTION ..................................... 5
HANDSET LAYOUT ................................. 7
BASE LAYOUT ...................................... 8
HANDSET CHARGE CRADLE LAYOUT ......... 8
PARTS CHECKLIST ................................. 9
MODULAR JACK REQUIREMENTS .......... 9
IMPORTANT INSTALLATION INFORMATION .. 10
IMPORTANT INSTALLATION GUIDELINES ...10
INSTALLING THE PHONE .........................11
CONNECTING THE AC
(ELECTRICAL) POWER ........................11
CONNECTING THET ELEPHONE LINE ..... 12
WALL MOUNTING THE BASE ............. 12
PROGRAMMABLE FUNCTIONS ............... 12
USING THE SOFT KEYS .................... 12
LANGUAGE ............................. 12
TELEPHONE CALL DURING AN
INTERCOM CALL ................... 22
USING INTERCOM WITH
EXTERNALT ELEPHONE CALLS ... 22
AREA CODE ............................ 13
TWO-WAY CALLING ........................ 22
THREE-WAY CALLING ...................... 23
TRANSFERRING EXTERNAL CALLS TO
OTHER HANDSETS .......................... 23
MEMORY ........................................... 24
STORING NAMES AND NUMBERS IN
MEMORY ....................................... 24
STORING A REDIAL NUMBER ............. 25
INSERTING A PAUSE IN THE DIALING
SEQUENCE ..................................... 25
RINGER TONE ......................... 13
TONE/PULSE ........................... 14
REGISTRATION ......................... 14
HANDSET DE-REGISTRATION ...... 15
GLOBAL DE-REGISTRATION ......... 16
WALKIET ALKIE ........................ 16
DEFAULT SETTING .................... 17
BASIC OPERATION ............................... 17
CHARGE INDICATOR ......................... 17
MAKING A CALL ............................. 17
ANSWERING A CALL ........................ 18
CALLT IMER .................................... 18
AUTO STANDBY .............................. 18
RINGER ON/OFF SWITCH ................. 18
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
THE LIGHTNING FLASH CAUTION: TO REDUCE THE RISK OF
AND ARROW HEAD
ELECTRIC SHOCK, DO NOT REMOVE
WITHIN THE TRIANGLE COVER (OR BACK). NO USER
WARNING SIGN
ALERTING YOU OF
IMPORTANT
IS A WARNING SIGN
ALERTING YOU OF
“DANGEROUS
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
INSTRUCTIONS
ACCOMPANYING THE
PRODUCT.
VOLTAGE” INSIDE THE
PRODUCT.
WARNING:TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSETHIS PRODUCT TO
RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
3
REVIEWING, CHANGING, OR DELETING
INFORMATION STORED IN MEMORY .... 25
DIALING A NUMBER FROM MEMORY ... 26
CHAIN DIALING FROM MEMORY ......... 27
CALLER ID ........................................ 27
CALLER ID ERROR CODES ................ 28
RECEIVING AND STORING CALLER ID
RECORDS ....................................... 28
REVIEWING THE CALLER ID LIST ....... 29
STORING CALLER ID RECORDS IN
THE PHONE’S MEMORY .................... 29
DIALING A CALLER ID NUMBER ......... 30
DELETING THE CURRENT CALLER ID
RECORD ........................................ 31
DELETING ALL CALLER ID RECORDS .. 31
CHANGING THE BATTERY ...................... 32
BATTERY SAFETY PRECAUTIONS......... 32
BELT CLIP AND OPTIONAL HEADSET ....... 33
CONNECTING THE BELT CLIP .............. 33
CONNECTING AN OPTIONAL HEADSET
TO THE HANDSET ............................. 33
DISPLAY MESSAGES ............................ 34
HANDSET SOUND SIGNALS .................. 35
TROUBLESHOOTING GUIDE ................... 36
GENERAL PRODUCT CARE .................... 39
CAUSES OF POOR RECEPTION ............... 39
SERVICE ............................................ 40
ACCESSORY ORDER FORM ................... 41
LIMITED WARRANTY ............................ 44
SAVETHESE INSTRUCTIONS
4
INTRODUCTION
CAUTION: When using telephone equipment, there are basic safety
instructions that should always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this product and save them for
future reference.
Congratulations on purchasing the GE Dual Cordless HandsetTelephone
System.This system operates in the 2.4 GHz frequency range, and is unique
to conventional cordless telephones. When the base is connected to electrical
power and a telephone line, you can place a fully-featured cordless handset
anywhere electrical power is available.
Features:
•
•
•
•
•
•
2.4 GHz digital technology
Handset to handset Intercom
2-way and 3-way Conference/CallTransfer
Call Waiting and Caller ID Compatible
Tone/Pulse Dialing
Up to 50 Name and Number Memory Dialing
This telephone has been designed to be simple to use, however, you can
reach its full potential more quickly by taking a few minutes to read this
Instruction Book.This telephone is a multifunction product for use with Call
Waiting and Caller ID services available from your local telephone company.
Your Caller ID Call Waiting phone allows you to:
•
•
•
•
•
•
View the name and telephone number of a caller (Call Waiting Caller ID).
Identify callers before you answer the phone.
View the time and date of each incoming call.
Record up to 40 Caller ID messages sequentially.
Know who called while you are on the other line or when you were away.
Screen unwanted calls, eliminate harassment from annoying calls, or to
get prepared before answering a call.
5
IMPORTANT: Because cordless phones operate on electricity, you should
have at least one phone in your home that isn’t cordless, in case the power in
your home goes out.
IMPORTANT: In order to use all of the features of this telephone, you must
subscribe to two separate services available from your local telephone
company: the standard Name/Number Caller ID Service to know who is
calling when the phone rings and Caller ID with Call Waiting Service to know
who is calling while you are on the phone.
INSTALLATION NOTE: Some cordless telephones operate at frequencies
that may cause interference to nearby TVs, microwave ovens, and VCRs. To
minimize or prevent such interference, the base of the cordless telephone
should not be placed near or on top of a TV, microwave ovens, or VCR. If such
interference continues, move the cordless telephone farther away from these
appliances. Certain other communications devices may also use the 2.4 GHz
frequency for communication, and, if not properly set, these devices may
interfere with each other and/or your new telephone. Typical devices that may
use the 2.4 GHz frequency for communication include wireless audio/video
senders, wireless computer networks, multi-handset cordless telephone
systems, and some long-range cordless telephone systems.
6
HANDSET LAYOUT
display
soft keys
format/conference button
talk/callback button
f
ere
n
n
c
e
o
c
v
c
a
l
l
b
format
a
c
cid/vol (up or down
arrow) buttons
k
l
o
v v
/
TALK
d
i
c
redial button
redial
flash
page
ringer
i
n
t
flash button
ringer button
def
abc
1
4
7
3
6
9
2
page/int button
ghi
mno
jkl
5
8
wxyz
pqrs
tone
tuv
pause
oper
#
*
0
*tone button
#pause button
7
BASE LAYOUT
in use/page indicator
charge indicator
Back Side
antenna
in use/
page
charge
page
page button/indicator
HANDSET CHARGE CRADLE LAYOUT
AC power supply
charge
charge indicator
8
PARTS CHECKLIST
Make sure your package includes the items shown here.
n
f n
ere
c
e
o
n
f n
ere
c
e
c
o
c
v
fla
c
a
v
fla
l
l
c
a
l
l
b
a
c
format
b
a
format
k
c
k
l
o
l
v v
/
d
o
TALK
c
v v
/
i
c
in use/
page
TALK
d
i
re
d
sh
ia
re
l
d
sh
page
ringer
ia
l
page
ringer
i
n
i
n
t
t
charge
page
def
1
4
7
abc
2
def
3
6
9
1
4
7
abc
3
6
9
2
ghi
mno
jkl
ghi
mno
jkl
5
8
5
8
wxyz
pqrs
tone
tuv
wxyz
pqrs
tone
tuv
pause
pause
oper
0
#
oper
0
#
*
*
Mounting
pedestal
Dual Handsets
Belt clip
Base
charge
Telephone line
cord
Handset Charge Cradle
AC power supply
MODULAR JACK REQUIREMENTS
You need an RJ11C type modular jack, which is the most
common type of phone jack and might look like the one pictured
here. If you don’t have a modular jack, call your local phone
company to find out how to get one installed.
9
IMPORTANT INSTALLATION INFORMATION
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
•
Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
•
•
Use caution when installing or modifying telephone lines.
Temporarily disconnect any equipment connected to the phone such as
faxes, other phones, or modems.
IMPORTANT INSTALLATION GUIDELINES:
•
•
•
Install telephone near both a telephone (modular) jack and an electrical
power outlet.
Avoid sources of noise, such as a window by a busy street, and electrical
noise, such motors, microwave ovens, and fluorescent lighting.
Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
•
•
•
Avoid areas of excessive moisture or extremely low temperature.
Avoid dusty locations.
Avoid other cordless telephones or personal computers.
10
INSTALLING THE PHONE
Choose the best location to install your base and handset charge cradle.
Your base and handset charge cradle should be placed on a level surface
such as a desk or table top, or you may mount the base on a wall.
charge
CONNECTING THE AC (ELECTRICAL) POWER
1. On the base, plug one end of the power supply cord into the power jack
on the back of the base and the other end into an electrical outlet.
CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2489 that
came with this unit. Using other power supplies may damage the unit.
2. Plug the handset charge cradle into an electrical outlet.
NOTE: The charge indicator on the base and the charge indicator on the
handset charge cradle turns on to indicate the handset battery is charging.
Allow the system to charge for 12 hours prior to first use. If you don’t
properly charge the system, battery performance is compromised.
11
CONNECTING THE TELEPHONE LINE
On the base, plug the one end of the telephone line cord into the jack on
the back of the base and the other end into a modular wall phone jack.
WALL MOUNTING THE BASE
NOTE: For best results, leave the base on a flat surface during initial charging
before you hang it on the wall.
1. Turn the base over.
2. Attach the wall mounting pedestal by first inserting the tabs on the open
edge of the pedestal into the slots on the lower portion of the bottom of
the base.Then push down and snap the pedestal into place.
3. Slip the mounting holes (on the back of the pedestal) over the wall plate
posts and slide the unit down into place. (Wall plate not included.)
PROGRAMMABLE FUNCTIONS
This system uses a menu structure and soft key function buttons to give
you access to all of the built-in features.
USING THE SOFT KEYS
There are three buttons under the display box which represent several soft
key (programmable) functions. Use the buttons to activate the soft key icons
that appear in the display box.You may program the following items with the
soft keys: Language, Area Code, RingerTone,Tone/Pulse, Registration,
Deregistration, Walkie-Talkie, and Default Setting.
LANGUAGE
Make sure your phone is OFF (not inTALK mode).
1. Press the MENU soft key to go to the LANGUAGE menu.
2. Press the cid/vol (up or down arrow) button and the OK soft key to go to
the language sub menu.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or
use the cid/ vol (up or down arrow) button to scroll to the desired
language. (English is the default setting).
12
5. Press the OK soft key to save your selection.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
AREA CODE
Make sure your handset is in the menu mode.
1. Press the cid/vol (up and down arrow) button to move the cursor to
AREA CODE.
2. Press the OK soft key and SET AREA CODE - - - shows in the display.
(“- - -” is the default setting.)
3. Use the touch tone pad to enter your 3 digit area code.
4. Press the OK soft key to save your selection.The display returns to the
main menu.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
RINGER TONE
Make sure your handset is in the menu mode and make sure the ringer is
turned on.You may choose from six different ringer tones.
1. Use the cid/vol (up or down arrow) button to move the cursor to
RINGERTONE.
2. Press the OK soft key and you will hear the selected ringer tone.The default
setting is 1.
3. Use the touch tone pad to enter a ringer tone number (1 through 6) , or use
the cid/vol (up or down arrow) button to scroll to the desired setting.You
will hear a sample of the ringer tone you select.
4. Press the OK soft key to save your selection.The display returns to the
main menu.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
13
TONE/PULSE
Most telephone systems use tone dialing, however, some may still use
pulse dialing.This system is pre-set to tone dialing. Depending on your
service type, set the dialing mode as follows:
Make sure your handset is in the menu mode.
1. Press the cid/vol (up and down arrow) buttons to move the cursor to
TONE/PULSE.
2. Press the OK soft key and SETTONE/PULSE 1TONE 2PULSE shows in
the display.
3. Use the touch tone pad to select 1 forTONE dialing or 2 for PULSE
dialing, or use the cid/vol (up and down arrow) button to scroll to 1
(TONE) or 2 (PULSE) dialing.
4. Press the OK soft key to save your selection.The display returns to the
main menu.
NOTE: Press the EXIT soft key once to keep the previous setting and
return to the main menu.
If you aren't sure which dialing system you have, set the telephone to tone
dialing and make a test call. If the call connects, the setting is correct. If the
call does not connect, set the telephone to pulse dialing.
REGISTRATION
The dual handsets included with the 21006 are pre-registered at the factory
and are ready to use. However, if you want to name a handset (i.e.:YOUR
NAME), you must re-register the handset by following the steps below. When
a handset is named, it works much like Caller ID for internal call. Handset
names appear in the display box when you make and receive internal calls.
During the registration process, keep the handset near the base. Make
sure your handset is in the menu mode.
14
1. Press the cid/vol (up and down arrow) button to move the cursor to
REGISTRATION.
2. Press the OK soft key and REGISTER HANDSET? shows in the display.
3. Press the OK soft key and HOLD BASE PAGE WAIT FOR BEEP shows in
the display.
4. Press and hold the page button on the base unit until you hear a
long tone at the handset. CONFIRM REGISTRATION? shows in the
handset display.
5. Press the OK soft key to confirm the registration. When handset
registration is complete, ENTER NAME shows in the display.
6. Enter the handset name.
NOTE: If you make a mistake, press the DEL soft key to backspace and erase
the wrong characters.
7. P ress the OK soft key to save.You will hear a confirmation tone.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu. Or press and hold the EXIT soft key to return to standby mode.
HANDSET DE-REGISTRATION
Deregistration cancels a handset’s registration. If you do not know a
handset’s name, you should deregister the handset according to the steps
below. During the de-registration process, keep the handset near the base.
Make sure your handset is in menu mode.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press the cid/vol (up and down arrow) to move the cursor to
DEREGISTRATION (if handset 1 is being de-registered).
2. Press the OK soft key and DE-REGISTER HANDSET 1? shows in the
display if handset 1 is being de-registered.
15
3. Press the OK soft key and MOVE NEARTO BASE then CONFIRM
DEREGISTRATION? appears in the display.
4. Press the OK soft key again and HANDSET DEREGISTERED shows in the
display.You will hear a confirmation tone.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
GLOBAL DE-REGISTRATION
If one or more handsets becomes lost, you should de-register all handsets
to ensure proper system operation. Follow the steps below to deregister
all handsets at one time.
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
1. Press and hold the page button on the base until the IN USE/PAGE
indicator on the base flashes.
2. Press and hold the page button on the base again until the IN USE/PAGE
indicator on the base flashes rapidly.
3. Press and release the page button on the base once. All handsets are
de-registered and REGISTER HANDSET? shows in the display.
WALKIE TALKIE
This feature allows a pair of handsets to be used like walkie talkies (electrical
power to the base unit is not required for walkie talkie operation). Make sure
your handset is in the menu mode.
1. Press the cid/vol (up or down arrow) button to move the cursor to
WALKIETALKIE.
2. Press the OK soft key and WALKIETALKIE ENABLE? shows in the
display.
3. Press the OK soft key again and WALKIETALKIE ENABLED shows in the
display.
4. Press the page/int button to send and answer calls.
16
NOTE: To deactivate the walkie talkie feature, press the EXIT soft key on
each handset to return to standby mode. You will hear a confirmation tone.
DEFAULT SETTING
As you become familiar with this system, you may prefer to use the
system’s original settings. Follow the steps below to return to the factory
default settings. Make sure your handset is in the menu mode.
1. Press the cid/vol (up and down arrow) button to move the cursor to
DEFAULT SETTING.
2. Press the OK soft key and DEFAULT SETTING 1YES 2NO shows in the
display.
3. Use the touch tone pad to select 1 (YES) 2 (NO), or use the cid/vol (up or
down arrow) button to move the cursor to 1 (YES) or 2 (NO).
NOTE: If you choose “YES” all the settings in the programmable menu are
returned to factory default setting.
4. Press the OK soft key to save your selection.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the main menu.
BASIC OPERATION
CHARGE INDICATOR
When the charge indicator is lit, the handset is correctly seated in the cradle
and is charging.
MAKING A CALL
1. Pick up the handset and press the talk/callback button. Listen for a
dial tone.
2. Dial the number you want to call.
3. When finished, press the talk/callback button to hang up.
17
ANSWERING A CALL
1. Pick up the handset and press the talk/callback button on the handset.
2. When finished, press talk/callback to hang up.
NOTE: Adjust the handset volume by pressing the cid/vol (up or down arrow)
button during a call.
CALL TIMER
After you press the talk/callback button on the handset, the built-in call timer
shows on the display and begins counting the length of time of the call.
PRE-DIALING
Make sure the phone is OFF (not inTALK mode).
1. Enter the telephone number you wish to call.The telephone number
shows in the handset display.
2. Press the talk/callback button on the handset and the number
automatically dials.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the DEL
soft key until all of the digits are erased.
AUTO STANDBY
If you place the handset in the cradle while the handset is off the hook
(during a call), the handset automatically disconnects the line.
RINGER ON/OFF SWITCH
The handset ringer switch is pre-set to ON.
1. Press the ringer button on the handset and RINGER ON 1ON 2OFF
shows in the display (if the original ringer setting is ON).
2. Use the touch tone pad to select 1ON or 2OFF, or use the cid/vol (up or
down arrow) button to select 1ON or 2OFF.
3. Press the OK soft key to save your selection, or press the EXIT soft key
to retain the original setting.
18
NOTE: When the handset is set to RINGER OFF, the ringer off icon displays
continuously until the ringer is turned back on.
FLASH/CALL WAITING
If you subscribe to the combined Call Waiting Caller ID service from your
local telephone company, you will receive Caller ID information (if available)
on Call Waiting calls. During a phone call, you will hear a beep to indicate
another call is waiting on the line and Caller ID information for the waiting
call shows on the handset display.To connect to the waiting call, press the
flash button on the handset and your original call is put on hold.You may
switch back and forth between the two calls by pressing the flash button.
TIP: Don’t press the talk/callback button on the cordless handset to activate a
custom calling service, such as call waiting, or you’ll hang up the phone.
LAST NUMBER REDIAL
To quickly redial the last number you dialed:
1. Press the talk/callback button.
2. Press the redial button.
-OR-
3. Press the redial button first, then press the talk/callback button. If you
get a busy signal and want to keep dialing the number, press the redial
button to quickly redial the number.
HOLD
Press the HOLD soft key on handset to put a call on hold. LINE ON HOLD
shows in the display.To release the line, press the EXIT soft key.
NOTE: If you continue the call on a separate extension phone, your cordless
phone will release the line to the extension phone.
EXIT
Press the EXIT soft key to exit a menu function and return to the
previous screen.
19
PAGE
The page feature helps you locate a misplaced handset.To send and receive
pages, all handsets must be registered. If your handset is not registered,
follow the instructions in the Registration section of this manual.
HANDSET TO HANDSET PAGING
Dual handsets will be respectively assigned with handset 1 and handset 2.
Make sure the phone is OFF (not inTALK mode).
1. Press and release the page/int button on the handset. PAGING
EXTENSION? shows in the display.
2. Use the touch tone pad to enter the handset number you want to page.
3. To cancel the page, press the EXIT soft key, or press the page/int button. Or
you may press talk/callback on the receiving handset.
PAGING FROM THE BASE/GROUP PAGE
Use the base-only to page both registered handsets at the same time.
1. Press the page button on the base. Both handsets beep for two minutes
and PAGING FROM BASE shows on each handset’s display.
2. To cancel the page, press the page button on the base, or press the talk/
callback button on each handset.
MUTE
To have a private, off-line conversation, use the MUTE feature.The party
on the other end of the line cannot hear you, but you can still hear them.
1. Press the MUTE soft key.The handset display shows MUTE ON.
2. Press the MUTE soft key to cancel and return to your phone
conversation.
TEMPORARY TONE DIALING
This feature is useful only if you have pulse dialing service.TemporaryTone
Dialing enables pulse (rotary) service phone users to access touch-tone
services offered by banks, credit card companies, etc. For example, when you
call your bank you may need to enter your bank account number.Temporarily
switching toTouchTone mode allows you to send your number.
20
1. Dial the telephone number and wait for the line to connect.
2. When your call is answered, press the * tone button on the handset
number pad to temporarily change from PULSE dialing toTONE dialing.
3. Follow the automated instructions to get the information you need.
4. Hang up the handset and the phone automatically returns to PULSE
(rotary) dialing mode.
RECEIVER VOLUME CONTROL
When the handset is off the hook (in talk mode) you may adjust the
receiver volume by pressing the cid/vol (up or down arrow) button.There
are four volume levels to choose from. When the maximum or minimum
volume level is reached, the phone beeps twice. VOL 1 is minimum and
VOL 4 is maximum.
INTERCOM
The intercom feature allows you to have a conversation with another
handset without tying up the telephone line. And since the telephone line
is not being used, you can still receive incoming calls.
MAKING AN INTERCOM CALL
Make sure the phone is OFF (not inTALK mode).
1. Press the page/int button on the handset.
2. Use the touch tone pad to select the handset you want to page with.
NOTE: To cancel page, press the EXIT soft key on the sending handset.
3. Wait for the person at the receiving handset to press the page/int button.
NOTE: If the receiving handset does not answer within two minutes, the intercom
call is automatically canceled. The originating handset displays NO ANSWER.
5. When finished, press the EXIT soft key or page button on either handset
to deactivate the intercom.
21
RECEIVING AN INTERCOM CALL
When an intercom call is received, the handset rings.To answer the
intercom call, press the page/int button on the handset.
ADVANCED INTERCOM FEATURES
RECEIVING AN INCOMING TELEPHONE CALL DURING AN INTERCOM CALL
During an intercom call, if a telephone call is received, both intercom users
are alerted with a tone.To take the line, press the talk/callback button to
end the intercom call and wait for the incoming call to connect.
USING INTERCOM WITH EXTERNAL TELEPHONE CALLS
During a telephone call, you may use the intercom/paging function to page
another handset and have an off line, private (two-way) intercom
conversation.You may also have a three-way conversation between the
external caller and the handsets, or you may transfer the external
telephone call to another handset.
NOTE: Before you intercom/page another handset, you must decide whether
you want to create a two-way or a three-way conversation.
TWO-WAY CALLING
1. During an external call, press the HOLD soft key to place the external call
on hold. LINE ON HOLD shows in the display on the sending handset.
2. Press theTRANS soft key and use the touch tone pad to enter the
handset number (1 or 2) you want to page/intercom.
NOTE: The receiving handset presses the page/int button to answer the
intercom. Both intercom users may speak privately. The external caller is
unable to hear the conversation.
3. When finished, press the EXIT soft key to end the intercom call,
return to the talk mode, and resume your original conversation.
22
THREE-WAY CALLING
1. During an external call, press the HOLD soft key to place external call
on hold.
2. Press the CONF soft key. LINE ON HOLD EXTENSION? shows in the
display.
3. Use the touch tone pad to select Handset 1 or Handset 2.You will hear a
paging tone and PAGING FROM . . . shows in the display on the
receiving handset.
NOTE: The receiving handset presses the page/int button to answer
the intercom.
4. Then press the conference/format button on the handset to conference
with the receiving handset and the external caller. CONFERENCE shows
in the display on the originating and receiving handset.
TRANSFERRING EXTERNAL CALLS TO OTHER HANDSETS
You may transfer an external call from handset to handset.
1. Press the HOLD soft key on the handset to put the line on hold.
2. Press theTRANS soft key. LINE ON HOLD EXTENSION? shows on the
originating handset’s display.
3. Use the touch tone pad on the handset to select Handset 1 or Handset 2.
You will hear a paging tone. PAGING shows on the originating handset’s
display, and PAGING FROM . . . shows on the receiving handset’s display.
4. When the receiving handset connects, press the talk/callback button on
the originating handset to transfer the call.
-OR-
5. Press the talk/callback button on the originating handset to transfer the
call. If the receiving handset does not answer within 30 seconds, the
originating handset will ring back.
23
MEMORY
The handset has memory dialing storage areas. Fifty 15-character names and
24-digit telephone numbers may be stored in the handset memory.
STORING NAMES AND NUMBERS IN MEMORY
1. Make sure the phone is OFF (not inTALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the desired memory location button (01 through 50). If the
memory location is occupied, the memory location and stored name
and number appear on the display. If the memory location is empty,
EMPTY appears in the display.
4. Press the EDIT soft key.The display shows ENTER NAME.
5. Use the handset number pad to enter a name (up to 15 characters). More
than one letter is stored in each of the number keys. For example, to enter
Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for
the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times
for the second letter L, and press the 1 key to insert a space between the
first and last name. Press the 7 key 4 times for the letter S; press the 6 key
once for the letter M; press the 4 key 3 times for the letter I; press the 8 key
for the letterT; press the 4 key twice for the letter H.
6. Press the OK soft key to confirm and save your selection.The display
shows ENTERTEL NUMBR.
7. Use the touch tone pad to enter the telephone number (up to 24 digits,
including pauses) and press the OK soft key again to save your
selection.The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.
8. To enter another name and number in a different memory location,
please follow step 1 and repeat the process.
24
STORING A REDIAL NUMBER
1. Make sure the phone is OFF (not inTALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press any number key (01-50) to store the phone number in that
memory location, or press cid/vol (up and down arrow) button to scroll
to the desired memory location.
4. Press the EDIT soft key and ENTER NAME shows on the display.
5. Use the touch tone pad to enter the name, then press the OK soft key
and ENTERTEL NUMBR shows on the display.
6. Press the redial button to display the redial number.
7. P ress the OK soft key again to confirm.
NOTE: If the redial number has more than 24 digits, the redial number
cannot be stored in memory.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the # button on the handset number pad to insert a delay in
dialing sequence (of a stored telephone number) when a pause is
needed to wait for a dial tone (for example, after you dial 9 for an
outside line, or to wait for a computer access tone.) Each pause counts
as one digit in the dialing sequence.
REVIEWING, CHANGING, OR DELETING INFORMATION STORED IN MEMORY
To Review:
1. Make sure the phone is OFF (not inTALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the cid/vol (up or down arrow) buttons to scroll the stored names
and numbers, or use the handset number pad to enter the memory
location number.
25
To Change:
Use the same procedure to change a stored number as you do to store a
number and just replace one stored phone number with a different one.
To Delete:
1. Make sure the phone is OFF (not inTALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the cid/vol (up or down arrow) button to scroll to the record you
want to delete.
4. Press the DEL soft key to mark the record for deletion.The display shows
DELETE?
5. Press the OK soft key to delete the record. DELETED shows in the display.
NOTE: If you don’t want to change or delete a number, simply press the
EXIT soft key, or wait for one minute to exit the review mode automatically.
DIALING A NUMBER FROM MEMORY
1. Make sure the phone is (inTALK mode) ON by pressing the talk/callback
button.
2. Press the DIR soft key to display the stored information.
3. Use the touch tone pad to enter the memory location number.The
number dials automatically.
-OR-
1. Make sure the phone is OFF (not inTALK mode).
2. Press the DIR soft key to display SELECT MEMORY 01-50.
3. Press the number key (01-50) for the memory location of the phone
number you want to dial, or use the cid/vol (up or down arrow) button
to scroll to the number you want to dial.
4. Press the talk/callback button.The number dials automatically.
26
CHAIN DIALING FROM MEMORY
Use this feature to make calls that require a sequence of numbers, such as a
calling card number used for a frequently called long distance number.The
following example shows how you can store each part of the dialing
sequence and use chain dialing to make a call through a long distance service:
The Number For
Memory Location
Long Distance Access Number
Authorization Code
Frequently called long distance number
7
8
9
1. Make sure the phone is ON (inTALK mode) by pressing the talk/
callback button.
2. Press the DIR soft key, and then press 07.
3. When you hear the access tone, press the DIR soft key, and then press 08.
4. At the next access tone, press the DIR soft key and then 09.
CALLER ID
Caller ID (CID) is a service available from your local telephone company.
For Caller ID to work on this system, you must subscribe to Caller ID
service.To receive Caller ID information for a Call Waiting call, you must
subscribe to the combined Caller ID Call Waiting service.
When your telephone rings, and you are subscribed to Caller ID Call
Waiting service, you will receive information (if available) transmitted by
your local telephone company.You will also receive Caller ID information
from Call Waiting calls. If you receive an incoming call and you are already
on the phone, Caller ID information for the Call Waiting call shows on the
display.This information may include the phone number, date and time; or
the name, phone number, and date and time.
27
Date call
received
Number of new
calls received
Time call
received
Caller’s phone number
Caller’s name
CALLER ID ERROR CODES
Various Caller ID error messages may appear in the display. Refer to the
Caller ID Display Messages section for more information.
RECEIVING AND STORING CALLER ID RECORDS
When you receive a call, the Caller ID information is transmitted between
the first and second ring.The Caller ID information appears on the display
while the phone rings, giving you a chance to monitor the information and
decide whether or not to answer the call.
If you are not at home or cannot answer, your telephone’s Caller ID
memory automatically stores the call number, date, time, phone number,
and name for the 40 most recent calls received so you can see who called
while you were unavailable. When the 41st call is received, the oldest
Caller ID record (1st call) is automatically deleted.
You may review the stored information for the most recent 40 calls at any
time. Calls received since your last review show as NEW in the display.
28
REVIEWING THE CALLER ID LIST
As calls are received and stored, the display is updated to let you know
how many calls have been received.To scroll through Caller ID list:
1. Press the cid/vol (up or down arrow) button to review the newest
Caller ID record.
2. Press the cid/vol (up or down arrow) button to review the oldest
Caller ID record first.
As you review calls stored in Caller ID memory, the display shows you the
following information for each call:
•
•
•
•
•
The telephone number of the caller.
The number of the call, with regard to the order received.
The name of the caller, if this service is available in your area.
Time and date the call was received.
NEW appears for all calls that have not been previously reviewed.
NOTE: Check with your local phone company regarding name
service availability.
STORING CALLER ID RECORDS IN THE PHONE’S MEMORY
You may store Caller ID information in the phone’s memory. It is not
possible to reformat CID records stored in memory.
TIP: To prevent the CID information from automatically being deleted, you
may want to store it in the phone’s memory.
NOTE: It is important that you format CID records correctly before
storing in memory.
29
1. Use the cid/vol (up or down arrow) button to scroll to the desired
Caller ID record.
2. Press the SAVE soft key to display SELECT MEMORY 01-50.
3. Use the touch tone pad to enter a memory location number (for
example, press 01 to store the record in memory location one). If the
memory location had an existing memory record, you must confirm
replacement by pressing the OK soft key.
NOTE: Press the EXIT soft key once to keep the previous setting and return to
the sub-menu.
DIALING A CALLER ID NUMBER
While reviewing the Caller ID list, you may call the phone number showing
in the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press cid/vol (up or down arrow) button until the desired call record
shows in the display.
Depending on (a) how the incoming caller’s phone number is formatted
when it is received, and (b) whether or not you previously pre-
programmed your local area code into the set up menu, you may need to
adjust the format of the incoming caller’s stored phone number before
making the call.
Use the format button to edit the format of the displayed telephone number.
Available formats include:
Number of digits
Explanation
Example
Eleven digits
long distance code “1 ”
+3-digit area code
1-317-888-8888
+7-digit telephone number.
Ten digits
3-digit area code +
7-digit telephone number.
317-888-8888
888-8888
Seven digits
30
7-digit telephone number.
3. If the number will not dial as shown, press the format/conference
button. Repeat if necessary, until the correct number of digits show in
the display.
4. Press the talk/callback button on the handset.The number dials
automatically.
NOTE: If the number is corrupted, such as a number in a name or an
alphabetical character in a number, you will hear an error tone at the handset
and the number won’t dial.
DELETING THE CURRENT CALLER ID RECORD
To delete a Caller ID message:
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (up or down arrow) button to display the Caller ID record
you want to delete.
3. Press the DEL soft key.The display shows DELETE CALL ID?
4. Press the OK soft key to erase the record.The display shows DELETED.
NOTE: Press the EXIT soft key on handset to return to the standby mode.
DELETING ALL CALLER ID RECORDS
To delete all the Caller ID names and numbers from the Caller ID memory:
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (up or down arrow) button to scroll to any Caller ID record.
3. Press DEL soft key for two seconds.The display shows DELETE ALL?
4. Press OK soft key to erase all of the current CID records.The
display shows NO CALLS.
NOTE: Press the EXIT soft key on the handset to return to the standby mode.
31
CHANGING THE BATTERY
CAUTION: To reduce the risk of fire or personal injury, use only the
battery 5-2459 that is compatible with this unit.
Make sure the 5telephone is OFF
before you replace battery.
1. Remove the battery compartment
door.
2. Disconnect the cord attached to the
battery pack from the jack inside the
battery compartment and remove
the battery pack from the handset.
Battery
compartment
3. Insert the new battery pack and
reconnect the battery plug.
Battery pack
4. Put the battery compartment door
back on.
5. Place handset in the base or handset
charge cradle to charge. If you don’t
charge the handset battery properly
(for 12 hours) when you first set up
the phone and/or when you install a
new battery pack, the battery ’s long-
Battery pack
plug
Battery compartment jack
term performance will be compromised.
BATTERY SAFETY PRECAUTIONS
•
Do not burn, disassemble, mutilate or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
•
•
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
32
BELT CLIP AND OPTIONAL HEADSET
CONNECTING THE BELT CLIP
To attach the belt clip, insert the sides of the belt clip into the slots on each
side of the handset. Snap the ends of the belt clip into place.
CONNECTING AN OPTIONAL HEADSET TO THE HANDSET
Each handset can be used with an optional headset hands free operation.
1. Connect the headset to the headset jack on the side of the handset
The handset receiver and microphone are disabled when the headset
is connected.
2. Adjust the headset to rest comfortably on top of your head and over
your ear. Move the microphone to approximately two to three inches
from your mouth.
3. Press the talk/callback button to answer a call or make calls using the
headset.
4. To return to normal operation, unplug the headset from the jack.
Belt clip
Headset jack
Slot for
belt clip
Slot for
belt clip
Headset Plug
33
DISPLAY MESSAGES
The following indicators show the status of a message or of the unit.
INCOMPLETE DATA
ENTER NAME
Caller ID information has been interrupted during
transmission or the phone line is excessively noisy.
Prompt telling you to enter the name in one of
the 50 memory locations.
LINE IN USE
Displays on handset while the line is being used.
ENTERTEL NUMBR
Prompt telling you to enter telephone number in
one of the memory locations.
DELETE ALL?
DELETE CALL ID?
DELETE?
Prompt asking if you want to erase all
Caller ID records.
Prompt asking if you want to erase the current
Caller ID record that is shown on the display.
Prompt asking if you want to erase one of the 50
numbers stored in the phone’s outgoing memory.
END OF LIST
Indicates that there is no additional information
in Caller ID memory.
NEW
Indicates call or calls have not been reviewed.
UNKNOWN CALLER
The incoming call is from an area not serviced by
Caller ID or the information was not sent.
SEARCHING
Handset is searching for the base.
OUT OF RANGE
Handset is too far away from the base. Move
closer to the base.
34
PAGING or
PAGING FROM
Someone has pressed the page/int button on the
base or handset.
BLOCKED NUMBER
REPT
The person is calling from a number that has
been blocked from transmission.
Repeat call message. Indicates that a new call
from the same number was received more
than once.
NO CALLS
NO DATA
There are no Caller ID records stored in memory.
No Caller ID information was received , you are
not subscribed to Caller ID service, or Caller ID
service is not working.
NEW CALL XX
Low Battery
XX represents the number of new Caller ID
records not reviewed.
Prompt indicating the battery needs to be
charged.
LONG DISTANCE
Prompt indicating Caller ID record is a long
distance call.
HANDSET SOUND SIGNALS
Signal
Meaning
A long warbling tone (with ringer on)
Three short beeps
Signals an incoming call
Page signal
One short beep (every 7 seconds)
Low battery warning
35
TROUBLESHOOTING GUIDE
TELEPHONE
No dial tone
•
Check installation:
Is the base power cord connected to a working electrical outlet?
Is the telephone line cord connected to the base unit and the modular
wall jack?
•
Connect another phone to the same jack. If it doesn’t work, the
problem might be your wiring or local service.
•
•
•
•
Is the cordless handset out of range of the base? Move closer to the base
Make sure the battery is properly charged (for 12 hours).
Make sure the battery pack (in the handset) is properly installed.
Does the handset beep when you press the talk/callback button? Does
the charge indicator on the base turn on?The battery may need to be
charged.
•
Place handset in charge cradle for at least 20 seconds to reset the unit.
Dial tone is OK, but can ’t dial out
•
Make sure theTONE/PULSE dialing mode is set to the type of phone
service you are subscribed to.
Handset does not ring
•
•
•
Make sure the handset ringer software switch is set to on.
The handset may be out of range. Move closer to the base.
You may have too many extension phones on your line.Try unplugging
some extension phones.
•
Check for a dial tone.
36
You experience static, noise, or fading in and out
•
•
The handset may be out of range. Move closer to base.
Make sure base is not plugged into an electrical outlet with another
household appliance. If necessary, relocate the base.
•
Charge the battery (for 12 hours).
Unit beeps
•
Clean the charging contacts on the cordless handset and charge cradle
with a soft cloth or an eraser.
•
•
See solutions for “No dial tone ” on previous page.
Replace the battery.
Memory dialing doesn’t work
•
•
Did you program the memory location keys correctly?
Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless
handset
•
Unplug the AC power supply from the wall outlet and the back of the
base. Remove the handset battery. Wait for 30 seconds and plug
the power supply back into the base and electrical outlet. Reconnect
the battery and charge for 12 hours.
Charge Indicator on the Base Flashes
•
Provided your phone company offers voice messaging service and you
subscribe to it, the charge indicator on the base flashes when the phone
is not in use to indicate there is a message waiting. It's stops flashing
after the message has been reviewed.
37
CALLER ID
No Display
•
•
Be sure the battery is properly charged (for 12 hours). Or replace the battery.
Make sure the unit is connected to a non-switched electrical outlet.
Disconnect the AC power supply from the base and reconnect it.
Caller ID Error Message
•
The unit displays this message if it detects anything other than
valid Caller ID information during the silent period after the first
ring. This message indicates the presence of noise on the line.
No Caller ID
Are you subscribed to Caller ID service from your local telephone
company?
•
BATTERY
If you experience any of the following problems, even after recharging the
battery, you may need to replace the battery pack:
•
•
•
•
Short talk time
Poor sound quality
Limited range
Charge indicator fails to turn on
38
GENERAL PRODUCT CARE
To keep your unit working and looking good, follow these guidelines:
•
•
•
Avoid dropping the handset, as well as other rough treatment to the phone.
Clean the phone with a soft cloth.
Never use strong cleaning agents, paint thinner, abrasive powder,
alcohol, or other chemical products to clean the unit. Doing so will
damage the finish.
•
•
Retain the original packaging in case you need to ship the phone at a
later date.
Periodically clean the charge contacts on the handset and base with a
clean pencil eraser.
CAUSES OF POOR RECEPTION
•
•
•
•
•
•
•
•
•
•
Aluminum siding.
Foil backing on insulation.
Heating ducts and other metal construction that can shield radio signals.
You ’re too close to appliances such as microwaves, stoves, computers, etc.
Atmospheric conditions, such as strong storms.
Base is installed in the basement or lower floor of the house.
Base is plugged into AC outlet with other electronic devices.
Baby monitor is using the same frequency.
Handset battery is low.
You ’re out of range of the base.
39
SERVICE
This product may be serviced only by the manufacturer or its authorized
service agents. Changes or modifications not expressly approved by
ATLINKS USA, Inc. could void the user ’s authority to operate this product.
For instructions on how to obtain service, refer to the warranty included in
this guide or call customer service at 1-800-448-0329.
Or refer inquiries to:
ATLINKS USA, Inc.
Manager, Consumer Relations
P O Box 1976
Indianapolis, IN 46206
Attach your sales receipt to the booklet for future reference or jot down the
date this product was purchased or received as a gift.This information will
be valuable if service should be required during the warranty period.
Purchase date ________________________________________________
Name of store ________________________________________________
40
41
INDEX
E
A
Equipment Approval Information 2
Exit 19
Accessory Order Form 41
Advanced Intercom Features 22
Answering a Call 18
Area Code 13
F
Flash/Call Waiting 19
Auto Standby 18
G
B
General Product Care 39
Global De-registration 16
Base Layout 8
Basic Operation 17
Battery 38
H
Battery Safety Precautions 32
Belt clip and Optional Headset 33
Handset Charge Cradle Layout 8
Handset De-Registration 15
Handset Sound Signals 35
Handset to Handset Paging 20
Hearing Aid Compatibility (HAC) 2
Hold 19
C
CallTimer 18
Caller ID 27, 38
Caller ID Error Codes 28
Causes of Poor Reception 39
Chain Dialing from Memory 27
Changing the Battery 32
Charge Indicator 17
Connecting an Optional Headset to the
Handset 33
Connecting the AC (Electrical) Power 11
Connecting the Belt clip 33
I
Important Installation Guidelines 10
Important Installation Information 10
Inserting a Pause in the Dialing
Sequence 25
Installing the Phone 11
Intercom 21
Interference Information 2
Introduction 5
Connecting theTelephone Line 12
D
L
Default Setting 17
Language 12
Last Number Redial 19
Limited Warranty 44
Deleting All Caller ID Records 31
Deleting the Current Caller ID Record 31
Dialing a Caller ID Number 30
Dialing a Number from Memory 26
Display Messages 34
42
M
S
Making a Call 17
Making an Intercom Call 21
Memory 24
Modular Jack Requirements 9
Mute 20
Service 40
Storing a Redial Number 25
Storing Caller ID Records in the Phone’s
Memory 29
Storing Names and Numbers
in Memory 24
P
T
Page 20
TemporaryTone Dialing 20
Three-Way Calling 23
Tone/Pulse 14
Transferring External Calls to Other
Handsets 23
Paging from the Base/Group Page 20
Parts Checklist 9
Pre-Dialing 18
Programmable Functions 12
Troubleshooting Guide 36
Two-Way Calling 22
R
Receiver Volume Control 21
Receiving an IncomingTelephone Call
During an Intercom Call 22
Receiving an Intercom Call 22
Receiving and Storing Caller ID
Records 28
U
Using Intercom with ExternalTelephone
Calls 22
Using the Soft Keys 12
Registration 14
Reviewing the Caller ID List 29
Reviewing, Changing, or Deleting
Information Stored in Memory 25
W
WalkieTalkie 16
Wall Mounting the Base 12
Ringer Tone 13
Ringer On/Off Switch 18
43
LIMITED WARRANTY
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
•
One year, from date of purchase.
(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.)
What we will do:
Provide you with a new or, at our option, a refurbished unit.The exchange unit is under warranty for the remainder of the original product ’s
warranty period.
How you get service:
•
•
Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend
using the original carton and packing materials.
•
”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be
presented to obtain warranty service. ”For rental firms, proof of first rental is also required. Also print your name and address and a
description of the defect. Send via standard UPS or its equivalent to:
ATLINKS USA, Inc.
c/o Thomson
11721 B Alameda Ave.
Socorro,Texas 79927
•
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
Insure your shipment for loss or damage. ATLINKS accepts no liability in case of damage or loss.
A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
•
Customer instruction. (Your Owner ’s Manual provides information regarding operating instructions and user controls. Any additional
information, should be obtained from your dealer.)
•
•
•
•
•
•
Installation and setup service adjustments.
Batteries.
Damage from misuse or neglect.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be
necessary.The return of the card is not required for warranty coverage.
Limitation of Warranty:
•
THE WARRANTY STATED ABOVE ISTHE ONLY WARRANTY APPLICABLETOTHIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY ATLINKS USA, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY
WAY INCREASETHE SCOPE OFTHIS WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDERTHIS WARRANTY ISTHE EXCLUSIVE REMEDY OFTHE CONSUMER. ATLINKS USA, INC.
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROMTHE USE OFTHIS PRODUCT OR ARISING OUT
OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT.THIS DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BYTHE LAWS OFTHE STATE OF INDIANA. EXCEPTTOTHE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT IS LIMITEDTOTHE APPLICABLE
WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
•
•
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied
warranty lasts so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your product
outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
ATLINKS USA, Inc.
101 West 103rd Street
Model 21006
16047060 (Rev 1 ES )
02-40
Printed in China
Indianapolis, IN 46290
© 2002 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
|