Aiphone Home Theater Screen MY CU PH B User Manual

Special  
Order  
Products  
Updated 07/2002  
MY-CU-PH/B  
Video Monitor  
MK Video Door Answering with Panasonic® Phone System  
- INSTRUCTIONS -  
This monitor allows one or two MK video door stations to be used for video door answering, where the  
communication is through a Panasonic® telephone system and the video appears on the Aiphone  
monitor(s). The MY-CU-PH/B integrates MK PanTilt door stations with Panasonic's KX-T series  
systems. (Works with KX-TA Advanced Hybrid series and KX-TD Digital Super Hybrid series.)  
WIRING DIAGRAM:  
VIDEO OUTPUT TO CABLE  
DISTRIBUTION OR CCTV MONITOR:  
Use Aiphone MYW-MD/B Demodulator,  
wired with 4 conductor, 18 AWG wire from  
the MY-CU-PH/B monitor or last MYH-CU  
in the system. Output is a standard 1V  
peak-to-peak video signal.  
MK-DBC*  
MY-CU-PH/B  
A1  
A2  
1A1  
1A2  
MK-DBC*  
A1  
A2  
2A1  
2A2  
MYH-CU  
MYH-CU  
MYW-MD/B  
B1  
B2  
A1  
A2  
+
-
U1  
U2  
DA1  
DA2  
B1  
B2  
A1  
A2  
B1  
B2  
+
-
U1  
U2  
*VIDEO DOOR STATIONS:  
Any Aiphone MK or MY Series video door  
station can be used:  
-MK-DAC: Surface mount, black  
-MK-DBC: Semi-flush mount, black  
-MK-DGC: Semi-flush mount, metal cover  
-MK-DGV: Semi-flush mount, vandal  
proof, stainless steel cover  
Move jumper to  
bottom 2 pins  
PS-1820UL  
PS-1820UL  
+
-
+
-
DV+  
DV-  
+
-
U1  
U2  
+
-
DV+ to core of Coax  
DV- to shield of coax  
-MK-DS/B: Surface mount, fixed camera,  
Black  
Raw video output  
(Analog wiring shown)  
PHONE JACK TERMINAL BLOCK WIRING  
With KX-TA62460 Doorphone card (Analog):  
D1  
E
D2  
1
3
2
4
D1 = 1 (Green)  
D2 = 3 (Black)  
E
E
= 2 (Red)  
= 4 (Yellow)  
MY-CU-PH/B TERMINAL DEFINITIONS:  
1A1  
1A2  
2-Wire connection  
for Door Station #1  
With KX-TD160 Doorphone card (Digital):  
D1 = 2 (Red)  
D2 = 4 (Yellow)  
E
E
= 1 (Green)  
= 3 (Black)  
Modular cord  
from terminal  
block to Door  
Adaptor in  
2A1  
2A2  
2-Wire connection  
for Door Station #2  
With KX-TD161 Doorphone card (Digital):  
Panasonic KSU  
D1 = 1 (Green)  
D2 = 4 (Yellow)  
E
E
= 2 (Red)  
= 3 (Black)  
B1  
B2  
Video out to  
sub monitors  
SPECIFICATIONS:  
Power Source:  
18V DC.  
Use one PS-1820UL for every three monitors.  
MY-CU-PH/B Standby: 0.12A; Max. 0.9A  
MYH-CU Standby: 0A; Max .4A  
Through Panasonic® Telephone system  
Hands free at door station  
Monitors activate and Panasonic phones ring  
4" direct view flat CRT  
525 lines  
U1  
U2  
Control wires  
Control wires  
Consumption:  
Communication:  
+
-
Positive 18V DC  
Negative  
Calling:  
Video Monitor:  
Scanning lines:  
To Panasonic Phone System:  
D1  
D2  
E
Door 1 call-in & audio  
Door 2 call-in & audio  
Common audio  
Dimensions (HxWxD): 8-14"" x 6" x 2"  
Weight: MY-CU-PH/B: 2.2 lbs.  
MYH-CU: 1.98 lbs  
Pg. 1  
 

ADC Network Router HDSL User Manual
Admiral Air Conditioner AAW 08CM1FHUE User Manual
Agri Fab Lawn Mower 45 0358 User Manual
Agri Fab Paint Sprayer 45 02934 User Manual
Alpine Network Cables CDE 9841R User Manual
American DJ DJ Equipment Multi Saucer User Manual
Audiovox Car Stereo System CD3720 User Manual
Axis Communications Security Camera 200+ User Manual
Behringer Computer Hardware FCA202 User Manual
Beko Microwave Oven MWB 2000 EX User Manual