Amana Range W10196156A User Manual

GAS RANGE  
USER INSTRUCTIONS  
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,  
please visit our website at www.amana.com for additional information. If you still need assistance, call us at 1-800-253-1301.  
You will need your model and serial number located on the oven frame behind the storage drawer panel.  
Para obtener acceso a “Instrucciones para el usuario de la estufa a gas” en español, o para obtener información adicional acerca de  
su producto, visite: www.amana.com  
Tenga listo su número de modelo completo. Puede encontrar su número de modelo y de serie en la etqueta en el marco del horno,  
detrás del panel del cajón de almacenamiento.  
Table of Contents  
RANGE SAFETY.......................................................................................2  
The Anti-Tip Bracket.............................................................................3  
FEATURE GUIDE.....................................................................................4  
COOKTOP USE........................................................................................5  
Sealed Surface Burners........................................................................5  
OVEN USE ................................................................................................6  
Electronic Oven Controls......................................................................6  
Aluminum Foil........................................................................................6  
Positioning Racks and Bakeware.........................................................7  
Oven Vent..............................................................................................7  
Baking and Roasting.............................................................................7  
Broiling ..................................................................................................7  
RANGE CARE...........................................................................................8  
Self-Cleaning Cycle...............................................................................8  
General Cleaning...................................................................................8  
Oven Light.............................................................................................9  
TROUBLESHOOTING..............................................................................9  
ACCESSORIES ......................................................................................10  
WARRANTY............................................................................................11  
W10196156A  
 
The Anti-Tip Bracket  
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-  
tip bracket fastened down properly.  
WARNING  
Tip Over Hazard  
A child or adult can tip the range and be killed.  
Connect anti-tip bracket to rear range foot.  
Reconnect the anti-tip bracket, if the range is moved.  
See the installation instructions for details.  
Failure to follow these instructions can result in death or serious burns to children and adults.  
Anti-Tip Bracket  
Making sure the anti-tip bracket is installed:  
Slide range forward.  
Look for the anti-tip bracket securely attached to floor.  
Slide range back so rear range foot is under anti-tip bracket.  
Range Foot  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING: To reduce the risk of fire, electrical shock,  
injury to persons, or damage when using the range, follow  
basic precautions, including the following:  
Proper Installation – The range, when installed, must be  
electrically grounded in accordance with local codes or, in  
the absence of local codes, with the National Electrical  
Code, ANSI/NFPA 70. Be sure the range is properly  
installed and grounded by a qualified technician.  
WARNING: TO REDUCE THE RISK OF TIPPING OF  
THE RANGE, THE RANGE MUST BE SECURED BY  
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK  
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE  
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET  
SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE  
BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP  
BRACKET.  
This range is equipped with a three-prong grounding plug  
for your protection against shock hazard and should be  
plugged directly into a properly grounded receptacle. Do  
not cut or remove the grounding prong from this plug.  
Disconnect power before servicing.  
Injuries may result from the misuse of appliance doors or  
drawers such as stepping, leaning, or sitting on the doors  
or drawers.  
WARNING: NEVER use this appliance as a space  
heater to heat or warm the room. Doing so may result in  
carbon monoxide poisoning and overheating of the oven.  
Maintenance – Keep range area clear and free from  
combustible materials, gasoline, and other flammable  
vapors and liquids.  
WARNING: NEVER cover any slots, holes or passages  
in the oven bottom or cover an entire rack with materials  
such as aluminum foil. Doing so blocks air flow through the  
oven and may cause carbon monoxide poisoning.  
Aluminum foil linings may also trap heat, causing a fire  
hazard.  
Storage in or on the Range – Flammable materials should  
not be stored in an oven or near surface units.  
Top burner flame size should be adjusted so it does not  
extend beyond the edge of the cooking utensil.  
CAUTION: Do not store items of interest to children in  
cabinets above a range or on the backguard of a range –  
children climbing on the range to reach items could be  
seriously injured.  
For self-cleaning ranges –  
Before Self-Cleaning the Oven – Remove broiler pan and  
other utensils. Wipe off all excessive spillage before  
initiating the cleaning cycle.  
SAVE THESE INSTRUCTIONS  
3
 
FEATURE GUIDE  
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked  
Questions (FAQs) section of our website at www.amana.com for more detailed instructions.  
WARNING  
Food Poisoning Hazard  
Do not let food sit in oven more than one hour before  
or after cooking.  
Doing so can result in food poisoning or sickness.  
KEYPAD  
FEATURE  
INSTRUCTIONS  
OVEN LIGHT  
Oven cavity light  
While the oven door is closed, press OVEN LIGHT to turn the light on and off. The oven light will  
come on when the oven door is opened. The oven light will not come on during the Self-Clean  
cycle.  
SELF-CLEAN  
Self-clean cycle  
See the “Range Care” section.  
START  
(To Lock Hold  
3 Sec)  
Oven control  
lockout  
1. Check that the oven and the Timer are off.  
2. Press and hold the START (To Loc Hold 3 Sec) keypad for 3 seconds.  
3. A tone will sound, and “Loc” will be displayed.  
4. Repeat to unlock. Only the CLOCK, OVEN LIGHT, and TIMER keypads will function with the  
controls locked.  
CLOCK  
TIMER  
Clock  
The Clock uses a 12-hour cycle with a.m. and p.m.  
1. Check that the oven and Timer are off.  
2. Press CLOCK.  
3. Press TEMP/HOUR “More” or “Less” arrow pads to set the time of day, including a.m. or  
p.m.  
4. Press CLOCK or START.  
Oven timer  
The Timer can be set in hours or minutes up to 12 hours and 59 minutes.  
1. Press TIMER.  
2. Press TEMP/HOUR “More” or “Less” arrow pads to set the length of time.  
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of  
countdown.  
4. Press TIMER twice to cancel the Timer. Do not press the CANCEL/OFF keypad because the  
oven will turn off.  
5. If the TIMER is running, but not in the display, press TIMER to display the countdown for  
5 seconds.  
BAKE  
Baking and  
roasting  
1. Press BAKE.  
2. Press TEMP/HOUR “More” or “Less” arrow pads to set a temperature other than  
350°F (175°C) in 5° increments between 170°F and 500°F (75°C and 260°C).  
3. Press START.  
4. To change the temperature repeat steps 1 and 2. Press START or wait 5 seconds for the  
change to take effect.  
5. Press CANCEL/OFF when finished.  
BROIL  
Broiling  
1. Position cookware in oven and close door to broil stop position. The door should remain  
closed.  
2. Press BROIL.  
3. Press TEMP/HOUR “More” or “Less” arrow pads to change the temperature in 5°F (5°C)  
increments between 300°F and 525°F (150°C and 275°C).  
4. Press START.  
5. Press CANCEL/OFF when finished.  
4
 
KEYPAD  
START  
FEATURE  
INSTRUCTIONS  
Cooking start  
The Start pad begins any oven function except Timer. If Start is not pressed within 5 seconds,  
“PUSH?” or “PSH” appears in the display. If start is not pressed within 1 minute after pressing a  
keypad, the function is canceled and the time of day is displayed.  
CANCEL/OFF  
TEMP/HOUR  
Range function  
The Cancel/Off keypad stops any function except the Clock, Timer, and Oven Control Lockout.  
Temperature and The “More” or “Less” arrow pads are used to adjust time and temperature settings.  
time adjust  
COOKTOP USE  
Sealed Surface Burners  
WARNING  
A
Fire Hazard  
D
B
Do not let the burner flame extend beyond the edge of  
the pan.  
E
Turn off all controls when not cooking.  
Failure to follow these instructions can result in death  
or fire.  
C
Electric igniters automatically light the surface burners when  
control knobs are turned to IGNITE.  
Before setting a control knob, place filled cookware on the grate.  
Do not operate a burner using empty cookware or without  
cookware on the grate.  
A. Burner cap  
B. Burner base  
C. Alignment pins  
D. Igniter  
E. Gas tube opening  
IMPORTANT: Do not obstruct the flow of combustion and  
ventilation air around the burner grate edges.  
To Set:  
1. Push in and turn knob counterclockwise to IGNITE.  
Burner cap: Always keep the burner cap in place when using a  
surface burner. A clean burner cap will help avoid poor ignition and  
uneven flames. Always clean the burner cap after a spillover and  
routinely remove and clean the caps according to the “General  
Cleaning” section.  
All 4 surface burners will click. Only the burner with the control  
knob turned to IGNITE will produce a flame.  
2. Turn knob to anywhere between HIGH and LOW.  
Gas tube opening: Gas must flow freely throughout the gas tube  
opening for the burner to light properly. Keep this area free of soil  
and do not allow spills, food, cleaning agents or any other material  
to enter the gas tube opening. Keep spillovers out of the gas tube  
by always using a burner cap.  
REMEMBER: When range is in use or (on some models)  
during the Self-Cleaning cycle, the entire cooktop area may  
become hot.  
A
Power Failure  
In case of prolonged power failure, the surface burners can be lit  
manually. Hold a lit match near a burner and turn knob  
counterclockwise it IGNITE. After burner lights, turn knob to  
setting.  
B
A. 1-1¹⁄₂" (25-38 mm)  
B. Burner ports  
Burner ports: Check burner flames occasionally for proper size  
and shape as shown above. A good flame is blue in color, not  
yellow. Keep this area free of soil and do not allow spills, food,  
cleaning agents or any other material to enter the burner ports.  
5
 
4. Replace the burner cap, making sure the alignment pins are  
To Clean:  
properly aligned with the burner cap.  
IMPORTANT: Before cleaning, make sure all controls are off and  
the oven and cooktop are cool. Do not use oven cleaners, bleach  
or rust removers.  
A
B
1. Remove the burner cap from the burner base and clean  
according to “General Cleaning” section.  
2. Clean the gas tube opening with a damp cloth.  
3. Clean clogged burner ports with a straight pin as shown. Do  
not enlarge or distort the port. Do not use a wooden toothpick.  
If the burner needs to be adjusted, contact a trained repair  
specialist.  
A. Incorrect  
B. Correct  
5. Turn on the burner. If the burner does not light, check cap  
alignment. If the burner still does not light, do not service the  
sealed burner yourself. Contact a trained repair specialist.  
OVEN USE  
Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.  
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain  
birds. Always move birds to another closed and well-ventilated room.  
Electronic Oven Controls  
Control Display  
Fahrenheit and Celsius  
The temperature is preset at Fahrenheit, but can be changed to  
The display will flash when powered up or after a power loss. Press  
CANCEL/OFF to clear. When oven is not is use the time of day is  
displayed. Indicator lights show functions that are in use.  
Celsius.  
To change: Press and hold BROIL for 5 seconds. A tone will  
sound, and “°C” or “°F” will appear on the display. Repeat to  
change back to Fahrenheit.  
Tones  
To exit mode, press CANCEL/OFF.  
Tones are audible signals, indicating the following:  
Basic Functions  
One tone  
12-Hour Shutoff  
The oven control is set to automatically shut off the oven 12 hours  
after the oven turns on. This will not interfere with any timed or  
delayed cook function.  
Valid pad press  
Oven is preheated (long tone)  
Function has been entered  
Oven Temperature Control  
IMPORTANT: Do not use a thermometer to measure oven  
temperature because opening the oven door may cause element  
cycling to give incorrect readings.  
The oven provides accurate temperatures; however, it may cook  
faster or slower than your previous oven, so the temperature  
calibration can be adjusted. It can be changed in Fahrenheit or  
Celsius.  
Reminder (on some models), repeating each minute after the  
end-of-cycle tones  
Three tones  
Invalid pad press  
Four tones  
End of cycle  
Reminder Tones: The audible tones at the end of the Timer may  
be set to beep once (“b1”) or continue to beep (“b”). Press and  
hold TIMER for 5 seconds to enter Options mode. “Opt” will appear  
on the display. Use TEMP/TIME to cycle through the options until  
“b” or “b1” is shown in the display. Choose on or off using the  
TIMER keypad. Press CANCEL to exit the mode.  
To Adjust Oven Temperature Calibration:  
1. Press and hold BAKE for 5 seconds until the oven display  
shows the current calibration, for example “0°F CAL” or “00.”  
2. Press the TEMP/TIME “More” or “Less” arrow pads to increase  
or to decrease the temperature in 10°F (5°C) amounts. The  
adjustment can be set between 30°F (15°C) and -30°F (-15°C).  
3. Press START.  
Aluminum Foil  
IMPORTANT: To avoid permanent damage to the oven bottom  
finish, do not line the oven bottom with any type of foil, liners or  
cookware.  
For best cooking results, do not cover entire oven rack with foil  
because air must be able to move freely.  
6
 
Positioning Racks and Bakeware  
IMPORTANT: To avoid permanent damage to the porcelain finish,  
do not place food or bakeware directly on the oven door or bottom.  
Rack Positions  
Rack 5: 2-rack baking.  
Rack 4: Use for broiling and toasting.  
Bakeware  
Rack 3: Most baked goods on a cookie sheet, jelly roll pan or  
muffin pan; casseroles; frozen convenience foods, frozen  
convenience foods.  
Rack 2: Roasting small cuts of meat and poultry, pies, bundt and  
angel food cakes, yeast bread; quick breads; and 2-rack baking.  
Rack 1: Roasting large cuts of meat and poultry.  
Rack 6: Extra-large items.  
Multiple Rack Cooking  
2-rack: Use rack positions 2 and 5.  
Baking Layer Cakes on 2 Racks  
For best results when baking cakes on 2 racks use racks 2 and 5  
for baking. Place the cakes on the racks as shown.  
To cook food evenly, hot air must be able to circulate. Allow  
2" (5 cm) of space around bakeware and oven walls. Make sure  
that no bakeware piece is directly over another.  
Racks  
Position racks before turning on the oven.  
Do not move racks with bakeware on them.  
Make sure racks are level.  
To move a rack, pull it out to the stop position, raise the front edge,  
and then lift out. Use the following illustration and charts as a  
guide.  
5
4
3
2
1
6
Oven Vent  
The oven vent releases hot air and moisture from the oven, and  
should not be blocked or covered. Blocking or covering the vent  
will cause poor air circulation, affecting cooking and cleaning  
results. Do not set plastics, paper or other items that could melt or  
burn near the oven vent.  
A
A. Oven vent  
Baking and Roasting  
The bake and broil burners cycle on and off in intervals. This  
feature is automatically activated when the oven is in use.  
Before baking and roasting, position racks according to  
“Positioning Racks and Bakeware” section. When roasting, it is not  
necessary to wait for the oven preheat cycle to end before putting  
food in unless it is recommended in the recipe.  
Preheating  
After START is pressed, the oven will display “PrE” until the  
temperature is above 170ºF (75ºC). Once 170ºF (75ºC) is reached,  
the display temperature will increase as the actual temperature of  
the oven increases. When the preheat temperature is reached, a  
tone will sound, and the selected temperature will appear on the  
display.  
Broiling  
Broiling uses direct radiant heat to cook food. Changing the  
temperature when Custom Broiling allows more precise control  
when cooking. The lower the temperature, the slower the cooking.  
Thicker cuts and unevenly shaped pieces of meat, fish and poultry  
may cook better at lower broiling temperatures.  
If you would like to purchase a broiler pan, one may be ordered.  
Please refer to the cover for contact information. Ask for Part  
Number 4396923.  
It is not necessary to preheat the oven before putting food in unless  
recommended in the recipe. Position food on grid in a broiler pan,  
then place it in the center of the oven rack. Close the door to  
ensure proper broiling temperature.  
For best results, use a broiler pan and grid. It is designed to  
drain juices and help avoid spatter and smoke.  
7
 
RANGE CARE  
Self-Cleaning Cycle  
How the Cycle Works  
IMPORTANT: The heating and cooling of porcelain on steel in the  
oven may result in discoloring, loss of gloss, hairline cracks and  
popping sounds.  
WARNING  
Before self-cleaning, make sure the door is completely closed or  
the door will not lock and the self-cleaning cycle will not begin.  
Once the oven has completely cooled, remove ash with a damp  
cloth. To avoid breaking the glass, do not apply a cool damp cloth  
to the inner door glass before it has completely cooled.  
To stop the self-cleaning cycle at anytime, press CANCEL/OFF. If  
the temperature is too high the oven door will remain locked and  
“cool” and “locked” will be displayed.  
Once the cleaning temperature has been reached, the electronic  
control requires a 12-hour delay before another self-clean cycle  
can be started.  
Burn Hazard  
Do not touch the oven during the Self-Cleaning cycle.  
Keep children away from oven during  
Self-Cleaning cycle.  
Failure to follow these instructions can result in burns.  
The oven light will not function during the self-cleaning cycle.  
IMPORTANT: The health of some birds is extremely sensitive to the  
fumes given off during the Self-Cleaning cycle. Exposure to the  
fumes may result in death to certain birds. Always move birds to  
another closed and well-ventilated room.  
Do not block the oven vent(s) during the Self-Cleaning cycle. Air  
must be able to move freely. Depending on your model, see “Oven  
Vent” section.  
Electronic Oven Control with Adjustable Self-Clean (HI - LO)  
The self-cleaning cycle can be set at HI self-clean time (4 hours  
30 minutes) or LO self-clean time (3 hours 30 minutes). The  
suggested clean times are 3 hours 30 minutes for light soil, or  
4 hours 40 minutes for heavy soil. The last 30 minutes of the cycles  
is for cool down.  
Do not clean, rub, damage or move the oven door gasket.  
To Self-Clean:  
1. Press SELF CLEAN to set the clean time to HI (4 hours  
Prepare Range  
30 minutes).  
Remove the broiler pan, grid, cookware and bakeware, all  
cooking utensils, oven racks and aluminum foil and, on some  
models, the temperature probe from the oven.  
2. Press the TEMP/TIME “More” or “Less” arrow pads to cycle  
between LO and HI clean time.  
3. Press START.  
Use a damp cloth to clean inside door edge and the  
1½" (3.8 cm) area around the inside oven cavity frame, being  
certain not to move or bend the gasket.  
The oven door will automatically lock. The CLEAN indicator  
light will be displayed. The time remaining will also be  
displayed.  
Remove plastic items from the cooktop because they may  
melt.  
4. When the self-clean cycle is complete and the oven cools, the  
CLEAN indicator light will turn off.  
Remove all items from the storage drawer.  
5. When the oven is completely cooled, remove ash with a damp  
cloth.  
General Cleaning  
IMPORTANT: Before cleaning, make sure all controls are off and  
the oven and cooktop are cool. Always follow label instructions on  
cleaning products. For additional information, you can visit the  
Frequently Asked Questions (FAQs) section of our website at  
Soap, water and a soft cloth or sponge are suggested first unless  
otherwise noted.  
STAINLESS STEEL (on some models)  
NOTE: To avoid damage to stainless steel surfaces, do not use  
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,  
steel-wool pads, gritty washcloths or abrasive paper towels.  
Damage may occur to stainless steel surfaces, even with one-time  
or limited use.  
Cleaning Method:  
EXTERIOR PORCELAIN ENAMEL SURFACES (on some  
Rub in direction of grain to avoid damaging.  
models)  
Stainless Steel Cleaner and Polish Part Number 31462:  
See cover for contact information.  
Food spills containing acids, such as vinegar and tomato, should  
be cleaned as soon as the entire range is cool. These spills may  
affect the finish.  
Liquid detergent or all-purpose cleaner:  
Rinse with clean water and dry with soft, lint-free cloth.  
Cleaning Method:  
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing  
pad:  
METALLIC PAINT (on some models)  
Do not use abrasive cleaners, cleaners with bleach, rust removers,  
ammonia or sodium hydroxide (lye) because paint surface may  
stain.  
Gently clean around the model and serial number plate  
because scrubbing may remove numbers.  
All-Purpose Appliance Cleaner Part Number 31682 (not  
included):  
See cover for contact information.  
8
 
On some models, do not remove seals under knobs.  
Cleaning Method:  
PORCELAIN-COATED GRATES AND CAPS  
Food spills containing acids, such as vinegar and tomato, should  
be cleaned as soon as the cooktop, grates and caps are cool.  
These spills may affect the finish.  
Soap and water or dishwasher:  
Pull knobs straight away from control panel to remove.  
To avoid chipping, do not bang grates and caps against each other  
or hard surfaces such as cast iron cookware.  
Do not reassemble caps on burners while wet.  
Do not clean in the Self-Cleaning cycle.  
Cleaning Method:  
CONTROL PANEL AND OVEN DOOR EXTERIOR  
To avoid damage to the control panel, do not use abrasive  
cleaners, steel-wool pads, gritty washcloths or abrasive paper  
towels.  
Cleaning Method:  
Nonabrasive plastic scrubbing pad and mildly abrasive  
cleanser:  
Glass cleaner and soft cloth or sponge:  
Apply glass cleaner to soft cloth or sponge, not directly on  
panel.  
Clean as soon as cooktop, grates and caps are cool.  
Dishwasher (grates only, not caps):  
All-Purpose Appliance Cleaner Part Number 31682 (not  
included):  
See cover for contact information.  
Use the most aggressive cycle. Cooked-on soils should be  
soaked or scrubbed before going into a dishwasher.  
Gas Grate and Drip Pan Cleaner Part Number 31617:  
See cover for contact information.  
OVEN RACKS  
Cleaning Method:  
Steel-wool pad  
SURFACE BURNERS  
See “Sealed Surface Burners” section.  
For racks that have discolored and are harder to slide, a light  
coating of vegetable oil applied to the rack guides will help  
them slide.  
COOKTOP CONTROLS  
To avoid damage to the cooktop controls, do not use steel wool,  
STORAGE DRAWER  
Check that storage drawer is cool and empty before cleaning.  
Cleaning Method:  
abrasive cleansers or oven cleaner.  
Do not soak knobs. When replacing knobs, make sure knobs are in  
the OFF position.  
Mild detergent  
Oven Light  
The oven light is a standard 40-watt appliance bulb. Before  
replacing, make sure the oven and cooktop are cool and the  
control knobs are in the off position.  
2. Turn the glass bulb cover in the back of the oven  
counterclockwise to remove.  
3. Turn bulb counterclockwise to remove from socket.  
4. Replace bulb, then bulb cover by turning clockwise.  
5. Plug in range or reconnect power.  
To Replace:  
1. Unplug range or disconnect power.  
TROUBLESHOOTING  
FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call.  
Household fuse blown or circuit breaker tripped?  
Replace the fuse or reset the circuit breaker. If the problem  
continues, call an electrician.  
Nothing will operate  
Is the main or regulator gas shutoff valve in the off  
position?  
See Installation Instructions.  
WARNING  
Is the range properly connected to the gas supply?  
Contact a trained repair specialist or see Installation  
Instructions.  
Surface burners will not operate  
Electrical Shock Hazard  
Plug into a grounded 3 prong outlet.  
Do not remove ground prong.  
Do not use an adapter.  
Is the oven in self-clean?  
Surface burners will not operate during self-clean cycle.  
Is the control knob set correctly?  
Push in knob before turning to a setting.  
Is this the first time the surface burners have been used?  
Turn on any one of the surface burner knobs to release air from  
the gas lines.  
Do not use an extension cord.  
Failure to follow these instructions can result in death,  
fire, or electrical shock.  
Are the burner ports clogged?  
See “Sealed Surface Burners” section.  
Is the power supply cord unplugged?  
Plug into a grounded 3 prong outlet.  
9
 
Surface burner flames are uneven, yellow and/or noisy  
Oven burner flames are yellow or noisy  
Are the burner ports clogged?  
Is propane gas being used?  
See “Sealed Surface Burners” section.  
The range may have been converted improperly. Contact a  
service technician or see cover for contact information.  
On models with caps, are the burner caps positioned  
properly?  
See “Sealed Surface Burners” section.  
Oven temperature too high or too low  
Does the oven temperature calibration need adjustment?  
See “Oven Temperature Control” section of the “Electronic  
Oven Controls” section.  
Is propane gas being used?  
The range may have been converted improperly. Contact a  
service technician or see cover for contact information.  
Display shows messages  
Surface burner makes popping noises  
Is the display showing a flashing time?  
Is the burner wet?  
There has been a power failure. Clear the display. On some  
models, reset the clock, if needed. See “Clock” keypad feature  
in the “Feature Guide” section.  
Let it dry.  
Gas range noises during Bake and Broil operation  
Noises that may be heard during the Bake and Broil operation:  
Whooshing, Poof, Clicking, Snaps, Pop  
These sounds are normal operational noises that can be heard  
each time the Bake or Broil burners ignite during the cycle.  
Is the display showing a letter followed by a number?  
Depending on your model, press OFF/CANCEL or CANCEL/  
OFF to clear the display. See “Control Display” in the  
“Electronic Oven Controls” section. If it reappears, call for  
service. See cover for contact information.  
A pop can be heard when the gas valve is opening or cycling  
on and will make a single pop when it snaps open from the  
solenoid. It sounds similar to a suction cup being pulled off of a  
piece of glass.  
Is the display showing a flashing “PUSH?” or “PSH”?  
See the “Start” keypad feature in the “Feature Guide” section.  
Self-Cleaning cycle will not operate  
The ignitors will click several times until the flame is detected.  
These are short clicking sounds like tapping a nail onto a piece  
of glass.  
Is the oven door open?  
Close the oven door all the way.  
Has the function been entered?  
See “Self-Cleaning Cycle” section.  
A whooshing or poof sound is heard when the Bake or Broil  
burner ignites.  
Has a self-clean cycle been run in the past 12 hours?  
If a self-clean cycle has been run, or canceled after the oven  
has reached temperature, you will have to wait 12 hours to  
restart.  
Excessive heat around cookware on cooktop  
Is the cookware the proper size?  
Use cookware about the same size as the surface cooking  
area, element or surface burner. Cookware should not extend  
more than ½" (1.3 cm) outside the cooking area.  
Oven cooking results not what expected  
Is the range level?  
Level the range. See the Installation Instructions.  
Cooktop cooking results not what expected  
Is the proper temperature set?  
Double-check the recipe in a reliable cookbook.  
Is the proper cookware being used?  
Ideal cookware should have a flat bottom, straight sides and a  
well fitting lid, and the material should be of a medium to heavy  
thickness.  
Is the proper oven temperature calibration set?  
See “Oven Temperature Control” section of the “Electronic  
Oven Controls” section.  
Is the control knob set to the proper heat level?  
See “Cooktop Use” section.  
Was the oven preheated?  
See “Baking and Roasting” section.  
Is the range level?  
Level the range. See the Installation Instructions.  
Are the racks positioned properly?  
See “Positioning Racks and Bakeware” section.  
Is there proper air circulation around bakeware?  
See “Positioning Racks and Bakeware” section.  
Oven will not operate  
Is this the first time the oven has been used?  
Turn on any one of the surface burner knobs to release air from  
the gas lines.  
Is the batter evenly distributed in the pan?  
Check that batter is level in the pan.  
Is the electronic oven control set correctly?  
See “Electronic Oven Controls” section.  
Is the proper length of time being used?  
Adjust cooking time.  
ACCESSORIES  
Stainless Steel Cleaner and Polish  
Split-Rack with Removable Insert  
(stainless steel models)  
Order Part Number 31462  
Order Part Number 4396927  
Broiler Pan  
Order Part Number 4396923  
All-Purpose Appliance Cleaner  
Order Part Number 31682  
Gas Grate and Drip Pan Cleaner  
Order Part Number 31617  
10  
 
Notes  
11  
 
AMANA® MAJOR APPLIANCE WARRANTY  
LIMITED WARRANTY  
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or  
furnished with the product, Amana brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Amana”) will pay for factory  
specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Amana designated service  
company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the  
country in which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original  
purchase date is required to obtain service under this limited warranty.  
ITEMS EXCLUDED FROM WARRANTY  
This limited warranty does not cover:  
1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair  
house fuses, or to correct house wiring or plumbing.  
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty  
coverage.  
3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is  
contrary to published user or operator instructions and/or installation instructions.  
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance  
with electrical or plumbing codes, or use of consumables or cleaning products not approved by Amana.  
5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage  
results from defects in materials or workmanship and is reported to Amana within 30 days from the date of purchase.  
6. Any food loss due to refrigerator or freezer product failures.  
7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be  
repaired in the home and only in-home service is covered by this warranty.  
8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.  
9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an  
authorized Amana servicer is not available.  
10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with  
published installation instructions.  
11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is  
void if the factory applied serial number has been altered or removed from your major appliance.  
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.  
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES  
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED  
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. AMANA SHALL NOT BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS,  
SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND  
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
If outside the 50 United States and Canada, contact your authorized Amana dealer to determine if another warranty applies.  
9/07  
For additional product information, in the U.S.A., visit www.amana.com.  
If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may  
contact Amana at the number below.  
Have your complete model number ready. You can find your model number and serial number on the label located on the oven frame  
behind the storage drawer panel.  
For assistance or service in the U.S.A., call 1-800-843-0304.  
If you need further assistance, you can write to Amana with any questions or concerns at the address below:  
In the U.S.A.:  
Amana Brand Home Appliances  
Customer eXperience Center  
553 Benson Road  
Benton Harbor, MI 49022-2692  
Please include a daytime phone number in your correspondence.  
Please keep these User Instructions and model number information for future reference.  
W10196156A  
SP PN W10204508A  
© 2008  
All rights reserved.  
4/08  
Printed in U.S.A  
®Registered Trademark/™Trademark of Maytag Corporation or its related companies.  
 

3Com Network Card 3C510 User Manual
Aiphone Intercom System AN 8050DSW User Manual
Altec Lansing Speaker VS3251 User Manual
AMX Network Card RMS User Manual
Audiovox Automobile Alarm PRO 9675FT User Manual
Audiovox Automobile Alarm PRO 9776C User Manual
Audiovox Car Satellite Radio System 128 7902A User Manual
Banner Automobile Accessories EZ LIGHT User Manual
BC Speakers Speaker System DE400 User Manual
Behringer Stereo Amplifier MDX4400 User Manual